Jump to content
+47 33 03 45 00
Logo Military
13 products

Vehicle interior

Vehicle interior solutions enhance the functionality of military vehicles, from modular storage systems to secure patient transport fixtures. These solutions are built to withstand impact and vibration, ensuring readiness in transport.

FA643 A130 jpg
FA643A130

10.G Litter Arm

FMS 10.G Low Profile Litter Arms are a lightweight, 10.G load-tested and blast tested in pairs. The 10.G Low Profile Litter Arm, replaces our original 10.G Litter Arm. This modular 10.G system creates a rapidly deployable Casualty Evacuation System compatible with multiple vehicle platforms. FMS Litter Arms are specifically designed to secure (1) critical casualty over rough terrain. The 10.G system can be installed in most military vehicles, providing an immediate CASEVAC mission configuration. One hand capture and release system is designed for use with any NATO litter.# P/N FA643A130 (arm only)  NSN 2590-01-587-3869                                                  # P/N FA643A200 (full system assembly)• 10.g Load Tested in all directions• Passed DoD Blast Testing (Aberdeen)• One-hand capture and release• Tactile landmarks for low light/no light conditions• Patented• Fielded by U.S. Forces

View product
FA643 A125 jpg
FA643A125

10.G Pivot Housing (includes #A120)

The FMS 10.G Low Profile Pivot Housing serves as an interface between the 10.G Low Profile Litter Arm, and interior vehicle MOLLE or Ferno-Track. Each FMS 10G Pivot Housing has quick-release provisions to allow removal of the litter arm from the mount, as well as, allowing the Litter Arm to be stowed in a horizontal or “flat” configuration inside the vehicle when not in use. • 10.g Load Tested in all directions• Passed DoD Blast Testing (Aberdeen)• Includes Quick-release provisions

View product
FA643 E130 jpg
FA643E130

8x8" Fixed Position Plate

The FMS 10.G fixed position mounting plate serves as an alternative base plate for the 10.G system where space may be limited. The mounting plate can be installed to any structurally appropriate vertical or horizontal surface (including overhead surfaces) and is designed for both Law Enforcement and Military vehicle applications. The fixed mounting plate allows for a single fixed position in which to deploy a 10.G Litter Arms or FMS medical device mounts inside the vehicle or any platform employing the FMS 10.G system.

View product
FA643 E131 jpg
FA643E131

Ferno-Track (standard series)

FMS Standard Ferno-Track serves as an alternate base plate for the 10.G  system. Ferno-Track can be installed to any vertical or horizontal structurally appropriate surface (including overhead surfaces) and is designed for both Law Enforcement and Military vehicle applications. Ferno-Track allows for either vertical or horizontal adjustability of mounted items inside the vehicle and is available in pre-cut or custom lengths as needed.FA643E134 (8 x 22.5" plate), NSN 2590-01-857-3862                     FA643E133 (8 x 30.0" plate)   FA643E131 (8 x 80" plate), NSN 5340-01-612-9458

View product
FM644 A100 jpg
FM644A100

FMS 20.G Litter Arm 1 pc

FMS 20.G Litter Arms are a more robust version of our 10.G Litter Arm evacuation system and compatible with FMS Interior Vehicle MOLLE, Ferno-Track (in vertical orientation) or our 20.G Fixed Position Plate. Originally designed for MRAP applications, the 20.G Litter Arm can be used in various LE or Military vehicles providing immediate CASEVAC capability. Integrated one-hand capture and release allows the 20.G arm to be compatible with any NATO style litter (pending vehicles interior space). Quick-release provisions allow the the 20.G Litter Arm to be rapidly installed, stowed or placed in "flat" configuration when not in use. Each pair of Ferno Military 20.G Litter Arms are tested to secure one casualty over rough terrain. CNC Machined from aircraft aluminum.• Fielded by U.S. Forces• Patented• 20.G Load tested in all directions• Passed DoD Blast Testing  Custom vehcile specific variants available

View product
FM645 E115 jpg
FM645E115

20.G Fixed Position Plate (Ballistic)

The FMS 20.G fixed position plate serves as an alternative base plate for the 20.G Litter Arm when space may be limited. The mounting plate can be installed to any structurally appropriate vertical surface and is designed for both Law Enforcement and Military vehicle applications. The fixed position plate allows for a single fixed position in which to deploy a 20.G Litter Arm or FMS medical device mounts inside the vehicle. Available in ballistic or non-ballistic alloy.    FM645E116 (non-ballistic)   FM645E115 (ballistic)

View product
FM645 E116 jpg
FM645E116

20.G Fixed Position Plate (NON Ballistic)

The FMS 20.G fixed position plate serves as an alternative base plate for the 20.G Litter Arm when space may be limited. The mounting plate can be installed to any structurally appropriate vertical surface and is designed for both Law Enforcement and Military vehicle applications. The fixed position plate allows for a single fixed position in which to deploy a 20.G Litter Arm or FMS medical device mounts inside the vehicle. Available in ballistic or non-ballistic alloy.    FM645E116 (non-ballistic)   FM645E115 (ballistic)

View product
FA643 A310 jpg
FA643A310

Generic Equipment Mount (no holes)

The Generic Equipment Mount serves as an interface between any medical device and our Ferno-Track or fixed position mounting plate. Available with or without pre-drilled mounting provisions. A single quick-release, allows for rapid deployment and removal of the mount.  FA643A310  (6”x 6”)FA643A315  (6”x 6” - pre-drilled hole pattern)

View product
FA643 A310 X jpg
FA643A310-X

Generic-X Equipment Mount (no holes)

The Generic-X  Equipment Mount serves as an interface exactly like its cousin, sans a few pounds. Available with or without pre-drilled mounting provisions. A single quick-release, allows for rapid deployment and removal of mount from wall.FA643A310-X  (6”x 6”)FA643A315-X  (6”x 6” - pre-drilled hole pattern)

View product
FA829 A1200 jpg
FA829A1200

ZOLL Ventilator Adaptor

The ZOLL Ventilator Adaptor is a lightweight custom piece that mounts directly to the back of the unit. Once the adaptor is in place, it serves as an interface between the device and our Universal Equipment Mount. Set screws allow the adaptor to be installed or removed quickly from the device as needed. Compatible with ZOLL Z-Vent, EMV+ and 330 Aspirator.

View product
FA829 A1700 jpg
FA829A1700

Sonosite M-Turbo Ultrasound Folding Mount

The Sonosite  M-Turbo Mount uses our Generic Mount as its base and attaches directly to the M-turbo unit. The mount serves as an interface between the device and our Standard  Ferno-Track™ or Fixed Position Plate.   Includes provisions for docking station. The M-Turbo unit and probe can be removed quickly from the device as needed. 

View product
FA829 A210 V jpg
FA829A210-V

ZOLL Ventilator ProV Adaptor

The  Zoll Ventilator Adaptor is a lightweight piece that mounts  directly to the back of the device. Once the adaptor is in place, it serves as an interface between the device and our ProV Receiver. Set screws allow the adaptor to be installed or removed quickly from the device as needed. Compatible with ZOLL Z-Vent, EMV+ and 330 Aspirator.

View product
FA829 A615 jpg
FA829A615

Overhead Folding IV Hook

Our Folding Overhead IV Hook is designed to hang 1-2 IV bags and is compatible with standard seat-track or Ferno-Track™. A single quick release allows the IV hook to be rapidly installed or removed as needed. Includes a folding feature for a low profile when not in use.  

View product