We offer specialized interior fittings for military tactical rescue vehicles and aviation, aircraft for CasEvac operations. Our tactical mounting systems are designed to accommodate medical equipment from various suppliers, including Zoll, Sequal Saros, Propaq, Tempus Pro, and more.
We also provide custom clamps and accessories for medical equipment that can be attached directly to standard NATO stretchers (STANAG 2040).
Our customized modular wall panels provide a lightweight and robust mounting surface inside the vehicle, allowing crew members to customize the vehicle's interior to meet immediate mission requirements. FMS-customized wall panels are compatible with our entire range of Litter Arms and medical equipment mounts. Our equipment is currently utilized by several NATO member countries.
This short track is commonly used for mounting single pieces of equipment supplied with black end caps. This track is suitable for wall and bench top applications.
This track is used for bonding applications where there are no fixing holes. This track is suitable for wall, ceiling and bench top applications. Bonding method is the sole responsibility of the person installaling the track.
This wall mount provides the platform for installation of the Zoll or Hamilton T1 or any other aviation products that use the D360 system. Zoll adaptor to fit the PD360 defibrillator. See Pt 0480156 for adaptor.
DEFIB WALL & BENCH MOUNT, LIFEPAK 15 (Bolt on kit)
FMS 10.G Low Profile Litter Arms are a lightweight, 10.G load-tested and blast tested in pairs. The 10.G Low Profile Litter Arm, replaces our original 10.G Litter Arm. This modular 10.G system creates a rapidly deployable Casualty Evacuation System compatible with multiple vehicle platforms. FMS Litter Arms are specifically designed to secure (1) critical casualty over rough terrain. The 10.G system can be installed in most military vehicles, providing an immediate CASEVAC mission configuration. One hand capture and release system is designed for use with any NATO litter.# P/N FA643A130 (arm only) NSN 2590-01-587-3869 # P/N FA643A200 (full system assembly)• 10.g Load Tested in all directions• Passed DoD Blast Testing (Aberdeen)• One-hand capture and release• Tactile landmarks for low light/no light conditions• Patented• Fielded by U.S. Forces
FMS Standard Ferno-Track serves as an alternate base plate for the 10.G system. Ferno-Track can be installed to any vertical or horizontal structurally appropriate surface (including overhead surfaces) and is designed for both Law Enforcement and Military vehicle applications. Ferno-Track allows for either vertical or horizontal adjustability of mounted items inside the vehicle and is available in pre-cut or custom lengths as needed.FA643E134 (8 x 22.5" plate), NSN 2590-01-857-3862 FA643E133 (8 x 30.0" plate) FA643E131 (8 x 80" plate), NSN 5340-01-612-9458
FMS 20.G Litter Arms are a more robust version of our 10.G Litter Arm evacuation system and compatible with FMS Interior Vehicle MOLLE, Ferno-Track (in vertical orientation) or our 20.G Fixed Position Plate. Originally designed for MRAP applications, the 20.G Litter Arm can be used in various LE or Military vehicles providing immediate CASEVAC capability. Integrated one-hand capture and release allows the 20.G arm to be compatible with any NATO style litter (pending vehicles interior space). Quick-release provisions allow the the 20.G Litter Arm to be rapidly installed, stowed or placed in "flat" configuration when not in use. Each pair of Ferno Military 20.G Litter Arms are tested to secure one casualty over rough terrain. CNC Machined from aircraft aluminum.• Fielded by U.S. Forces• Patented• 20.G Load tested in all directions• Passed DoD Blast Testing Custom vehcile specific variants available
The FMS 20.G fixed position plate serves as an alternative base plate for the 20.G Litter Arm when space may be limited. The mounting plate can be installed to any structurally appropriate vertical surface and is designed for both Law Enforcement and Military vehicle applications. The fixed position plate allows for a single fixed position in which to deploy a 20.G Litter Arm or FMS medical device mounts inside the vehicle. Available in ballistic or non-ballistic alloy. FM645E116 (non-ballistic) FM645E115 (ballistic)
The FMS 20.G fixed position plate serves as an alternative base plate for the 20.G Litter Arm when space may be limited. The mounting plate can be installed to any structurally appropriate vertical surface and is designed for both Law Enforcement and Military vehicle applications. The fixed position plate allows for a single fixed position in which to deploy a 20.G Litter Arm or FMS medical device mounts inside the vehicle. Available in ballistic or non-ballistic alloy. FM645E116 (non-ballistic) FM645E115 (ballistic)
The FMS 10.G Low Profile Pivot Housing serves as an interface between the 10.G Low Profile Litter Arm, and interior vehicle MOLLE or Ferno-Track. Each FMS 10G Pivot Housing has quick-release provisions to allow removal of the litter arm from the mount, as well as, allowing the Litter Arm to be stowed in a horizontal or “flat” configuration inside the vehicle when not in use. • 10.g Load Tested in all directions• Passed DoD Blast Testing (Aberdeen)• Includes Quick-release provisions
The FMS 10.G fixed position mounting plate serves as an alternative base plate for the 10.G system where space may be limited. The mounting plate can be installed to any structurally appropriate vertical or horizontal surface (including overhead surfaces) and is designed for both Law Enforcement and Military vehicle applications. The fixed mounting plate allows for a single fixed position in which to deploy a 10.G Litter Arms or FMS medical device mounts inside the vehicle or any platform employing the FMS 10.G system.
The ZOLL Ventilator Adaptor is a lightweight custom piece that mounts directly to the back of the unit. Once the adaptor is in place, it serves as an interface between the device and our Universal Equipment Mount. Set screws allow the adaptor to be installed or removed quickly from the device as needed. Compatible with ZOLL Z-Vent, EMV+ and 330 Aspirator.
The Sonosite M-Turbo Mount uses our Generic Mount as its base and attaches directly to the M-turbo unit. The mount serves as an interface between the device and our Standard Ferno-Track™ or Fixed Position Plate. Includes provisions for docking station. The M-Turbo unit and probe can be removed quickly from the device as needed.
Our IZOLL Ventilator surface mount uses our Generic Mounts as its base. Mount includes storage compartment for power cord. Compatible with our 10.G fixed position plate, and any of our Standard Ferno-Track or Custom Interior Vehicle MOLLE. Quick release provisions allow rapid installation or removal.
The Eclipse Surface mount is a lightweight, custom piece that attaches directly to any of our Standard Ferno-Track or Custom Interior Vehicle MOLLE. Fixed position plates are also available. Mount includes storage compartment for power cords, and (2) quick-release provisions allow the mount to be rapidly installed or removed as needed.
The Generic Equipment Mount serves as an interface between any medical device and our Ferno-Track or fixed position mounting plate. Available with or without pre-drilled mounting provisions. A single quick-release, allows for rapid deployment and removal of the mount. FA643A310 (6”x 6”)FA643A315 (6”x 6” - pre-drilled hole pattern)
The Generic-X Equipment Mount serves as an interface exactly like its cousin, sans a few pounds. Available with or without pre-drilled mounting provisions. A single quick-release, allows for rapid deployment and removal of mount from wall.FA643A310-X (6”x 6”)FA643A315-X (6”x 6” - pre-drilled hole pattern)
The Zoll Ventilator Adaptor is a lightweight piece that mounts directly to the back of the device. Once the adaptor is in place, it serves as an interface between the device and our ProV Receiver. Set screws allow the adaptor to be installed or removed quickly from the device as needed. Compatible with ZOLL Z-Vent, EMV+ and 330 Aspirator.
Our Mini-Track serves as the base plate of the Pro Series system and can be installed to any structurally appropriate surface allowing vertical or horizontal adjustability. Available in pre-cut (7", 12") or custom lengths as needed.
The ProV Universal Receiver serves as an interface with medical devices and our Mini-Track. Quick-release provisions allow the device to be deployed or removed from the receiver and allows rapid deployment, adjustability or removal of the receiver from the Mini-Track. The ProV includes a quick-cam feature to secure the fit and feel of the receiver to the Mini-Track.
