Our aviation interiors support medevac and tactical transport within aircraft, with secure mounting options and reinforced materials for safety under flight conditions.
Our IZOLL Ventilator surface mount uses our Generic Mounts as its base. Mount includes storage compartment for power cord. Compatible with our 10.G fixed position plate, and any of our Standard Ferno-Track or Custom Interior Vehicle MOLLE. Quick release provisions allow rapid installation or removal.
The Eclipse Surface mount is a lightweight, custom piece that attaches directly to any of our Standard Ferno-Track or Custom Interior Vehicle MOLLE. Fixed position plates are also available. Mount includes storage compartment for power cords, and (2) quick-release provisions allow the mount to be rapidly installed or removed as needed.
Our Mini-Track serves as the base plate of the Pro Series system and can be installed to any structurally appropriate surface allowing vertical or horizontal adjustability. Available in pre-cut (7", 12") or custom lengths as needed.
The ProV Universal Receiver serves as an interface with medical devices and our Mini-Track. Quick-release provisions allow the device to be deployed or removed from the receiver and allows rapid deployment, adjustability or removal of the receiver from the Mini-Track. The ProV includes a quick-cam feature to secure the fit and feel of the receiver to the Mini-Track.
The Mini ProV Adaptor is a lightweight, product specific custom piece that mounts directly to the back of the Propaq MD/X Series. Once in place, it serves as an interface between the Propaq MD/X Series and the Mini ProV receiver. (4) Screws allow the adaptor to be installed or removed quickly from the device as needed.
The Saros Pro Series adaptor provides a rapid mounting solution for any vertical or horizontal surface employing our Ferno Mini-Track and Pro-V receiver. Saros units can be easily removed and replaced as needed while the mount is secured in place.
The Single Track Stud (STS) is a semi-permanent stud designed to secure small and lightweight items on standard Ferno-Track™ or typical single row seat track. Available in size 10-32“ or ¼” fasteners.FM500A102-10.32FM500A102-1.4
The Single Track Stud (STS) is a semi-permanent stud designed to secure small and lightweight items on standard Ferno-Track™ or typical single row seat track. Available in size 10-32“ or ¼” fasteners.FM500A102-10.32FM500A102-1.4
The Single Track Mount (STM) is designed to mount an array of light equipment. For use with standard seat-track or Ferno-Track™, the STM can be used in a horizontal or vertical orientation. The STM can also be cut to custom lengths as needed for larger equipment. Quick release provision allows the mount to be rapidly installed, adjusted or removed as needed. CNC machined. Pictured 2.75" / 2 post.
The Single IV-1 Hook is designed to hold (1) IV bag. For use with standard seat-track or Ferno-Track™, the STM IV1 can be used in a horizontal or vertical orientation. A quick-release provision allows the mount to be rapidly installed, adjusted or removed.
Our Single Track Thermo Holster is designed to secure (1) Welch Allyn SureTemp® Plus 690 or 692 digital thermometer, and is compatible with standard seat-track or Ferno-Tack™. A quick-release allows the holster to be rapidly installed or removed as needed.
The IV Bag mount incorporates our IV hook-and-loop strap into one mount. Designed to secure (1) IV Bag, and is compatible with any of Standard Ferno-Track or Custom Interior Vehicle MOLLE. A single quick release allows the mount to be rapidly installed or removed as needed.
The Double IV-2 Hook is designed to hold (2) IV bags. For use with standard seat-track or Ferno-Track™, the STM IV2 has a quick-release provision that allows the mount to be rapidly installed, adjusted or removed.
Our FAA approved patient restraints are designed for use with all of our patient transport systems. Each restraint is removable and replaceable and conform to TSO C22g (Standard Restraint) and TSO C114 (Shoulder Harness).
The Saros™ Litter Clamp is a (2) piece kit that allows the Saros™ unit to be attached to any NATO litter, or any vertical surface using our Ferno-Mini-Track system. The Saros Litter Clamp has passed operational testing by U.S. Special Operations Command (SOCOM) and is officially integrated into the U.S. Department of Defense , Tactical Combat Casualty Care (TCCC) and Casualty Evacuation (CASEVAC) sets. CNC machined from aircraft aluminum.
Our Tempus Litter Clamp allows the Tempus to be attached to any NATO litter, vertical or horizontal pole. Design features allow side to side adjustability while keeping the unit at a prescribed angle in order to optimize the internal camera’s point of view. A single quick release allows the unit to be rapidly installed or removed from the mount as needed and includes an anti-rattle feature. CNC machined from aircraft aluminum.
Our FAA approved patient restraints are designed for use with all of our patient transport systems. Each restraint is removable and replaceable and conform to TSO C22g.
Ferno Military Systems' Blackhawk Litter Rack is designed for use in MH-60 / UH-60 airframes. The BLR installs in place of the four aft jump seats with or without internal fuel tanks. The rack utilizes existing seat mount positions and does not require any permanent alterations to the air frame. Once installed, mission aircraft have immediate casualty evacuation capability. The BLR carries a low weight penalty and can be installed/removed in minutes.
Our original Air Litter Support Platform (ALSP) is a simple, yet effective platform that allows medics or flight crew to efficiently load casualties into aircraft, when rapid loading is crucial. Once the ALSP is pre-loaded in fixed and rotary wing litter stanchions it serves as a receptacle platform for loading litter casualties.
The Modular Transport Litter System (MTLS) is designed for critical care transport, where it is necessary to transport patients along with an extensive selection of medical equipment. The MTLS system consists of a base litter platform employing our patent pending Tube-Track™, that provides an integrated track mounting system throughout the perimeter frame. A wide selection of general purpose and product specific track-mounting solutions are available. The MTLS can be configured for multi-mission advanced care applications.This stretcher has been developed and tested for Aviation use. An excellent aviation stretcher for medical evacuation in harsh environments.
