F90139
iN∫TRAXX Hamilton T1 Ventilator (non swivel or SafeMount)
HAMILTON T1 VENTILATOR (non swivel - no SafeMount)
138 products
iN∫TRAXX Vehicle Interior
iN∫TRAXX is a modular interior system for vehicles
INTRAXX is a complete system for vehicles that ensures all loose equipment inside the vehicle is safe, secure, flexible, and hygienic. The modular system includes wall-mounted rails, SafeMount equipment mounts to secure the equipment, SafeCab storage cabinets, and SafePak supply bags. The iNTRAXX modular system provides high flexibility, ensures secured equipment at all times, and simplifies hygienic cleaning.
Enhanced Safety
- All components are crash-tested according to European standard EN-1789 (10g) and the American standard SAE J3043 (26g).
- Being able to rearrange and move equipment inside the vehicle quickly while knowing it is always secure provides a more ergonomic and user-customized work environment.
- The iNTRAXX system enables quick, easy, and ergonomic placement of equipment inside the ambulance. Various rails can be installed on walls, ceilings, and bench surfaces, providing a range of customization options depending on where you work in the vehicle.
- The iNTRAXX system allows you to customize the ambulance with simple adjustments to perform tasks efficiently. Ready-made bags can be easily clicked into place, meaning a vehicle can perform a variety of tasks that are both cost-effective and smart.
- All components in the iNTRAXX system work together, meaning you can easily add devices or move equipment between ambulances depending on function and mission.
Enhanced Flexibility
- The modular system allows you to quickly adjust the placement of equipment based on your or your preferred approach.
- The need for special vehicles is reduced as you can quickly configure existing vehicles for different missions in minutes.
- Interoperability increases as all equipment is easily interchangeable between multiple vehicles and vehicle types.
- Sooner or later, changes occur in the equipment or the equipment is replaced by new models. With iNTRAXX, you simply switch the bracket for the new equipment; no expensive renovations are necessary.
Enhanced Hygiene
- Cleaning and sanitization are much easier as you can easily detach and wash all components.
- During decontamination, all equipment can be removed, giving you a clean work surface.
- All rails have drainage openings.
F90195
iN∫TRAXX 14LT Sharps mount ( no sharps)
1.4LT Sharps mount ( no sharps)
F90224
iN∫TRAXX G2 Schiller Defigard Touch 7 Mount
G2 Schiller Defigard Touch 7 Mount
F90141
iN∫TRAXX Sharps-Sharpsafe 4ltr
The Sharpsafe mount is for attaching the “Sharpsafe” brand of sharps bins to the iN∫TRAXX wall system. This mount can retain the 2ltr, 3ltr, 4ltr, 7ltr and 9ltr Sharpsafe bins.The 0480141 is only compliance with EN, SAE and AUS/NZ standard retaining the 2ltr, 3ltr, 4ltr Sharpsafe binsThe sharps bins must be purchased separately from your Sharpsafe distributorThe 0480141 is sold complete with the retention strap and plastic Sharpsafe mount
F90179
iN∫TRAXX Talon Litter Arm Light
5VDC LED strip light with controller housed in an Aluminium extrusion with an opaque defused cover. Adheres to the under side of the Talon 0480037 Litter arm, it provides a safe and secure light for the patient and attendant. The light includes a controller to change settings that can be easily set and remain in memory even after disconnection from power.
F90225
iN∫TRAXX Swivel Upgrade Service Kit
Swivel Upgrade Service Kit
F90198
iN∫TRAXX SafeMount to Aviation D360 Adaptor plate
The D.360 Swivel System is a two stage system that includes a device-specific adaptor disk and the D.360 Swivel Base. Each component is purchased separately for simple mix and match versatility.
F90228
iN∫TRAXX Swivel mount Handle Service kit ( short Handle)
Swivel mount HandleService kit ( short Handle)
F90199
iN∫TRAXX Combo Adaptor mount RP (078 079 and 088)
Combo Adaptor mount RP (078, 079 and 088)
F90229
iN∫TRAXX Swivel mount Handle Service kit ( Long Handle)
Swivel mount Handle Service kit ( Long Handle)
F90184
iN∫TRAXX Cabinet mount D360 (FA868A100)
Cabinet mount D360 (FA868A100)
F90299
iN∫TRAXX Multi-Cass movement safety system kit ( 1 person)
Multi-Cass movement safety system kit ( 1 person)
F90166
iN∫TRAXX Safeseat Wall Mnt Incl Dual Lap seat belt
Mounts into iNTRAXX and allows the ability to move the seat around the vehicle as clinical procedures demand
F90115
iN∫TRAXX Safeseat Wall Mnt Incl Single Lap seat belt
Mounts into iNTRAXX and allows the ability to move the seat around the vehicle as clinical procedures demand
F90100
iN∫TRAXX Glovebox, Triple
The Glovebox Triple holder accepts and secures most sizes of standard glove boxes. Designed to be easily cleaned, load and mount using our rotating lock knobs to secure to the iN∫TRAXX track.Glovebox is designed for horizontal track mounting onlyPlease refer to separate operators manual
F90101
iN∫TRAXX Glovebox, Quad
The Glovebox Quad holder accepts and secures most sizes of standard glove boxes. Designed to be easily cleaned, loaded, and mounted using our rotating lock knobs to secure to the iN∫TRAXX track.Glovebox is designed for horizontal track mounting only0480101 must have 4 glove boxes installed at all timesPlease refer to separate operators manual
F90106
iN∫TRAXX Trach Hamper, Ophart
Trash Bin Mount is a great alternative, as it is small and secure and can be mounted in both horizontal and vertical track.Plate is supplied as a kit including the bolts.Refer to separate operators manualNote: Ophart Bin is not supplied, purchase separately from your local Ophart supplier or alternatively, contact the FERNO team for assistance
F90146
iN∫TRAXX SafeMount - Threaded 12 kg
The 12 kg capacity SafeMount while lesser in capacity functions the same as the 25 kg version. It can be used to mount a variety of equipment.
F90149
iN∫TRAXX Defib mount - Zoll AED
The Zoll ADE3 mount is for iN∫TRAXX wall track mounting. Can mount into vertical or horizontal track. Zoll AED3 can be locked into this mount with or without its protective carry case.Can be retained in the mount with or without the Zoll AED CaseiN∫TRAXX track mount onlyCan be supplied as a Cabinet Mount 360 degree on special requestRefer to separate customer drawings for mounting detailsDefibrillator not included
F90150
iN∫TRAXX Defib mount - Zoll AED bolt on
The Zoll ADE3 mount is a direct to wall mounting. No track required. Zoll AED3 can be locked into this mount with or without is protective carry case.Can be retained in the mount with or without the Zoll AED CaseDirect to wall mount onlyCan be supplied as a Cabinet Mount 360 degree on special requestRefer to separate customer drawings for mounting detailsDefibrillator not included